Fit new lock barrel.
1. turn the key in the new barrel to position 2 (second click)
2. depress the pin
3. insert the barrel into the lock housing on the steering column until the pin pops into the locating hole.
4. re-attach the electrical switch
Wednesday 20 May 2009
Replacing the Lock Barrel on the Ignition Switch - Installation
Fit new lock barrel.
1. turn the key in the new barrel to position 2 (second click)
2. depress the pin
3. insert the barrel into the lock housing on the steering column until the pin pops into the locating hole.
4. re-attach the electrical switch
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment
Note: only a member of this blog may post a comment.