Installation sequence (well mine)1.Lift the differential into position
2.Fit the front bolts B & C to centralise the diff equally between the chassis plates. Check the hole alignment and make any adjustments to the size and location, once happy with the alignment remove bolts B&C.
3. The diff needs to be raised to allow access to install bolt A in to the slotted hole. The bolt is inserted from the drivers side. Once installed the diff can be lowered back to its final position to allow the remaining bolts to be installed.
Note: Make sure you install all washers and spacers before you lower the diff and install the other bolts.
4. Re-install bolts B & C.
5. Install bolt D.
6. Mark and drill the hole (10mm) for the rear diff mounting.
7. Install bolt E.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.